Read More

After installation, due to negligence, the transport locking pins (or positioning nails) on the tank cover were not flipped back or removed, causing the core to touch the tank shell. Other causes include: core clamping limbs touching the core limbs/columns; warped silicon steel sheets touching the clamping limbs; cardboard spacers between the lower core clamp feet and the iron yoke falling off, causing the clamp feet to touch the silicon steel sheets; or the thermometer socket being too long and touching the clamps, yoke, or core column. Read More

Here are several common methods for handling multi-point grounding faults in transformer cores: (1) For cores with external grounding leads, a resistor can be connected in series within the core grounding circuit to limit the grounding current. This method should only be used as an emergency measure. (2) For grounding faults caused by metallic foreign objects, the problem can usually be identified by performing a tank removal inspection (uncovering the core). (3) For grounding faults caused by burrs on the core or the accumulation of metal powder, the following methods have proven to be quite effective: Read More